{Top 7 Fixes} Key Stuck In Ignition Chevy Impala: Troubleshooting

As a Chevy Impala owner, you may have experienced a situation where the key is stuck in the ignition. This can be frustrating and can leave you stranded, not knowing what to do next.

But don’t worry, we are here to help. In this article, we will provide you with a comprehensive guide on how to deal with a key stuck in the ignition of your Chevy Impala.

Chevy impala key stuck in ignition and car won’t start

Mechanical Issues

Mechanical issues with the ignition system can be a common cause of a key getting stuck in the ignition. Some possible mechanical issues include:

Worn Out Key

If your key is worn out, it may not fit properly into the ignition cylinder, which can cause it to get stuck. Over time, keys can become worn due to regular use, and may need to be replaced.

Damaged Ignition Cylinder

If the ignition cylinder is damaged, it can prevent the key from turning or getting stuck. This can happen if the key is inserted with force or if the ignition is tampered with.

Broken Key Fob

If your key is attached to a key fob, a malfunctioning or broken key fob can also cause the key to get stuck in the ignition.

Electrical Problems

In addition to mechanical issues, electrical problems can also cause a key to get stuck in the ignition. Some possible electrical issues include:

Dead Battery

If the battery in your Chevy Impala is dead, it can prevent the key from turning or getting stuck in the ignition.

Chevy impala key stuck in ignition dead battery

If your Chevy Impala’s key is stuck in the ignition and you have a dead battery, there are a few things you can try:

  1. Try to jump-start your car: If you have jumper cables and another car available, you can try jump-starting your Impala. This might provide enough power to release the key from the ignition.
  2. Wiggle the steering wheel: Sometimes the steering wheel can get locked in place, which can make it difficult to remove the key from the ignition. Try wiggling the steering wheel back and forth while gently turning the key to see if this releases it.
  3. Check the gear shift: Make sure your Impala is in park. If it is not in park, the key may not be able to come out of the ignition.
  4. Replace the battery: If the battery is completely dead, you will need to replace it before you can start your Impala. Once you have a new battery, you should be able to start your car and remove the key from the ignition.

If none of these methods work, you may need to contact a mechanic or locksmith to help you remove the key from the ignition.

Common Causes: Key Stuck In Ignition Chevy Impala

Faulty Starter

If the starter is faulty, it can prevent the engine from starting and may also cause the key to get stuck in the ignition.

Human Error

Sometimes, human error can also cause a key to get stuck in the ignition. Some possible human errors include:

Steering Wheel Lock

If the steering wheel is locked, it can prevent the key from turning or getting stuck in the ignition. This can happen if the steering wheel is turned too far to one side, which engages the steering wheel lock.

Shifter Not in Park

If the shifter is not in the park position, it can prevent the key from turning or getting stuck in the ignition. This can happen if the shifter is accidentally left in neutral or another gear.

Loose Battery Connection

If the battery connection is loose, it can prevent the key from turning or getting stuck in the ignition. This can happen if the battery cables are not tightened properly.

Dirt and Debris in the Ignition Cylinder

Dirt and debris can accumulate inside the ignition cylinder over time, which can prevent the key from turning or getting stuck in the ignition.

Solutions to Fix Key Stuck in Ignition Chevy Impala

Now that we’ve discussed the most common causes of a key getting stuck in the ignition of a Chevy Impala, let’s look at some solutions to fix them. The solutions will depend on the specific cause of the problem.

  1. Diagnosis

The first step in dealing with a key stuck in the ignition is to diagnose the problem. There are several reasons why the key may be stuck, including a faulty ignition switch, a worn-out key, a damaged key cylinder, or a problem with the steering wheel lock. To determine the cause, try turning the steering wheel left and right while gently wiggling the key. If this doesn’t work, check to see if the key is worn out or damaged. If the key looks fine, it may be a problem with the ignition switch or the key cylinder.

  1. Try Turning the Key

In some cases, the key may be stuck due to a mechanical issue. In this case, try turning the key gently while applying pressure to the key. If the key turns, this may release the lock and allow you to remove the key. If this doesn’t work, try gently tapping the end of the key with a small hammer or similar object. This can sometimes help to release the lock and allow you to remove the key.

  1. Lubricate the Lock Cylinder

If the key is still stuck, try lubricating the lock cylinder with a silicone spray lubricant. This can help to release the lock and allow you to remove the key. Apply a small amount of lubricant to the key and insert it into the lock cylinder. Turn the key back and forth a few times to distribute the lubricant. If this doesn’t work, try using a graphite lubricant instead.

  1. Replace the Ignition Switch or Key Cylinder

If none of the above steps work, it may be necessary to replace the ignition switch or key cylinder. This is a more complicated process and may require professional help. To replace the ignition switch or key cylinder, you will need to remove the steering column covers and disconnect the wiring harnesses. Once the old switch or cylinder is removed, install the new one and reassemble the steering column covers.

  1. Preventing Future Key Stuck Incidents

To prevent future key stuck incidents, there are a few things you can do. First, always use a high-quality key that is properly cut. Second, avoid putting too much weight on the keychain, as this can wear out the key and the ignition cylinder. Third, avoid turning the key too hard or too fast, as this can damage the ignition cylinder. Finally, if you notice any problems with the ignition switch or key cylinder, have them repaired as soon as possible.

FAQs:

How much does it cost to replace the ignition cylinder in a Chevy Impala?

The cost of replacing the ignition cylinder in a Chevy Impala can vary depending on the year and model of the car, as well as the location and the mechanic. On average, the cost can range from $200 to $500, including parts and labor.

Can I remove the key with pliers or a screwdriver?

While it is possible to remove the key from the ignition cylinder with pliers or a screwdriver, it is not recommended. Doing so can cause damage to the ignition cylinder, and it can also create a safety hazard. If your key is stuck in the ignition cylinder, it is best to call a professional mechanic to help you remove it safely.

Why is my steering wheel locked, and how do I unlock it?

The steering wheel in a Chevy Impala can become locked if the ignition cylinder is not in the “off” position or if the car’s security system is engaged. To unlock the steering wheel, you can try turning the key to the “on” position, wiggling the steering wheel back and forth, or using the car’s security system to unlock it.

How can I prevent ignition cylinder problems in my Chevy Impala?

To prevent ignition cylinder problems in your Chevy Impala, you can take several steps, including keeping your key clean and dry, avoiding excessive force when turning the key, and having your ignition cylinder inspected and serviced regularly by a professional mechanic.

In conclusion, a key stuck in the ignition can be a frustrating experience, but it’s not the end of the world. By following the steps outlined in this article, you can diagnose and fix the problem yourself or with the help of a professional. Remember to take preventive measures to avoid future incidents and keep your Chevy Impala running smoothly.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top